Shower Bench Height

As a general rule of thumb, the standard shower bench size is 17 to 20 inches high with a depth of between 15 to 16 inches. This will have any length needed to fit the shower wall and be able to sit comfortably.

What is the height of an ADA shower seat?

SHOWER SEATS must be mounted with the top surface of the seat 17 inches to 19 inches (430 to 485mm) above the finish floor (Fig. 23b). Permanent or folding seats are now required by the 2009 ICC/ANSI Standards.

Where should a bench be placed in a shower?

You'll want your bench to be near your shower controls — it makes rinsing off and shaving much easier. To meet most industry guidelines, shower benches should measure 17 to 19 inches off the finished shower floor.

Should a shower bench be sloped?

The TCNA Handbook states that “All horizontal surfaces, for example shower seats, sills, curbs, etc., must slope towards drain.”

What is the standard height for a bench seat?

Although the standard height of a bench seat is between 18 and 20 inches, how high a bench seat should be will depend on who will be using it. For example, you may need a lower bench seat for young children in schools so that it is accessible for pupils.

How deep should the seat of a bench be?

The standard bench depth is between 15" and 20". A dining room bench tends to fall around 17.5" deep. A bench that is deeper than 20" might cause discomfort when sitting.

Are shower benches a good idea?

These are some reasons you should consider installing a built-in shower bench: Provides a foot rest for leg-shaving, exfoliating and foot scrubs (it's a lifesaver) Can provide extra surface for toiletries, sponges, and more. Provides a sitting option, especially important in case of mobility issues or injuries.

Can a small shower have a bench?

There's room for shower bench ideas in small spaces If your shower is small yet you like the idea of a bench then opt for a simple seat style design that can be attached to the wall. Another option is to have it fitted across a corner which would be even more space-saving but still allow you to sit down.

What kind of bench can I put in a shower?

The best materials for shower benches are teak, wood, or stone. Unlike most other woods, teak holds up well to excessive moisture. Wood may be warmer and more comfortable for a shower bench compared to other options. Stone benches, both natural and manufactured, are the next best option.

What is the best material for a shower bench?

Best Materials for Shower Benches (And Why Teak Outshines Them All!)

• Granite. Granite is a top choice for many when it comes to choosing the best material for their shower bench.
• Tile. Many people love tile for their shower benches because they can match it to the tile already in their bathroom. ...
• Marble. ...
• Teak, Teak, Teak!

How much weight can a floating shower bench hold?

How Much Weight Can a Floating Bench Hold? The typical weight capacity of a shower bench is 200 to 500 pounds, while a floating bench must support at least 400 pounds.

What is the minimum slope for a shower floor?

In a stall shower, the plumbing code requires the floor to be sloped one quarter (1/4) of an inch per foot in order to carry the water effectively to the drain. This slope, according to the TCNA Handbook is called “sloped fill” or commonly known as the pre-slope.

How tall is a mudroom bench?

The standard height of a mudroom bench is 18 inches, approximately 46 cm. However, you can also find 19 or 20 inch models that provide more space for storage while still being spacious enough not to feel cramped when loading your arms with clothing items and other belongings before heading out on an adventure!

How tall is an outside bench?

Outdoor Bench Dimensions That typically comes with a height between 18 to 20 inches, width or depth of about 12 to 15 inches, and a length that runs about 45 inches. This is the standard outdoor bench, but ultimately, it will stem from what the homeowners need.

What is the best angle for the back of a bench?

15 degrees is good for the back angle, BUT you should also slope the seat base down towards the back 5 degrees also. This stops people sliding forwards when they lean back and maintains the ideal 100 degree angle for lounging Michaels last point is extremely good advice.

How deep is the average seat?

On average, the seat depth of a sofa is between 21” and 24”. The average seat depth on a dining chair shrinks to 15” to 18” since these chairs aren't designed for long seated sessions.

How much space does a person need on a bench?

Typically, you should allocate 18 inches per person. So a 6ft bench will seat approximately 4 people.

Why do people have shower benches?

Having a bench in your shower means that you can sit down comfortably and wash without the need to try and balance. This allows you to go at your own pace, enjoy the warmth of the water and relax. A built-in bench also acts as a useful place to store your products.

Can you put a bench in a walk in shower?

Walk-in Shower With Bench Seat Shower benches are a wonderful way to add seating, storage, and texture on a shower wall. Wood is a good option for a bench because it is not cold like marble or tile and it is less expensive than solid stone.

Can I put a wooden bench in the shower?

A shower bench can be as simple as a wooden or plastic bench or chair that is placed in the shower when needed or as complex as a fully-installed fixture, making it part of the shower itself. The process for building a shower bench depends on which style you want to use.